Fa
En
Tilt Sensor
The ATS-20290A industrial tilt sensor is a Dual-Axis Inclinometer designed for precise measurement of tilt and deviation along the X and Y axes. Using a 3D MEMS sensor with an angle measurement range of ±90 degrees, it enables accurate monitoring of orientation changes, leveling, and deviation in equipment and structures. With a resolution of 0.01 degrees and an absolute accuracy of 0.016 degrees at 25°C, this product is well suited for applications where precise angle measurement and small tilt variations matter.Beyond its precise measurement capability, the ATS-20290A is designed for use in industrial environments and long-term monitoring projects. Its rugged aluminum housing with IP67 protection, an operating temperature range of -30°C to +80°C, and a 7-pin industrial connector make this industrial tilt sensor suitable for a wide range of working conditions. It supports RS485, RS422, and RS232 serial interfaces along with the Modbus-RTU protocol, giving users the ability to configure communication parameters and transmit data in various formats.
This industrial inclinometer can be used in monitoring and control systems to measure tilt and deviation in industrial machinery and equipment, mobile platforms, robotics, agricultural machinery, rail transport equipment, cranes and hoists, and structures and bridges. Its ability to connect directly with RS485- and Modbus-RTU-based control systems and equipment makes it easier to use in industrial automation, monitoring, and Internet of Things (IoT) projects.
ATS-20290A Technical Specifications
- Sensor Type: Dual-axis (X and Y) inclinometer based on a capacitive MEMS element
- Accuracy & Resolution: Resolution of 0.01 degrees and absolute accuracy of 0.016 degrees at 25°C
- Repeatability: 0.02 degrees in a stationary state
- Serial Communication: Supports RS485, RS422, and RS232
- Protocol & Operating Mode: Modbus-RTU, supports String and Hex formats, Master-Slave and Continuous modes
- Electrical Specifications: 9 to 36 VDC power supply, current draw of 10 to 20 mA
- Dimensions & Weight: 82 × 70 × 35 mm, weight 300 g
- Housing & Environmental Rating: Rugged aluminum housing with IP67 protection rating
- Temperature Range: Operating temperature of -30°C to +80°C and storage temperature of -40°C to +100°C
- Calibration: Factory calibration of temperature, bias, and gain; with a temperature error of 0.01 degrees within the calibrated range
- Connector: 7-pin Golden Russian Connector
Common Applications
- Monitoring and control of road construction machinery and civil engineering equipment
- Condition and safety monitoring of cranes, hoists, and lifting systems
- Stability monitoring of structures and bridges in industrial projects
- Use in agricultural equipment and modern farming machinery
- Application in robotics and industrial mobile platforms
- Monitoring of rail transport equipment and power transmission systems
Product Technical Images
| Measurement Specifications |
|---|
| Sensor Type: Dual-axis (X and Y) inclinometer based on a capacitive MEMS element |
| Measurement Axes: Two axes, X and Y |
| Resolution: 0.01 degrees |
| Absolute Accuracy: 0.016 degrees at 25°C |
| Repeatability: 0.02 degrees in a stationary state |
| Calibration: Factory calibration of temperature, bias, and gain |
| Electrical and Communication Specifications |
|---|
| Supply Voltage: 9 to 36 VDC |
| Current Draw: 10 to 20 mA |
| Communication Interfaces: RS485, RS422, and RS232 |
| Communication Protocol: Modbus-RTU |
| Data Output Type: ASCII / Hex (configurable) |
| Operating Modes: Master-Slave and Continuous |
| Mechanical and Environmental Specifications |
|---|
| Dimensions: 82 × 70 × 35 mm |
| Weight: 300 g |
| Housing Material: Rugged aluminum |
| Protection Rating: IP67 |
| Operating Temperature: -30°C to +80°C |
| Storage Temperature: -40°C to +100°C |
| Connector: 7-pin Golden Russian Connector |
Frequently Asked Questions – ATS-20290A Dual-Axis Tilt Sensor
Is this sensor suitable for outdoor use and humid environments?
Yes, the ATS-20290A sensor features a rugged aluminum housing with an IP67 protection rating, making it fully resistant to dust and moisture ingress and ideal for outdoor industrial applications.
Can the sensor be connected to a PLC?
Yes, thanks to its support for the standard Modbus-RTU protocol and RS485, RS422, and RS232 serial ports, this sensor integrates easily with most industrial PLCs and monitoring systems.
Is the sensor calibrated before shipping?
Yes, every ATS-20290A sensor is factory-calibrated using precision laboratory equipment, with bias and gain errors, along with temperature compensation across the operating range, applied to each unit.
How can the sensor's data output be configured?
Users can receive data continuously in ASCII or Hex format, as well as through the Modbus-RTU protocol with an adjustable data transmission rate.
What is the measurement range and accuracy of this inclinometer?
This sensor measures tilt on two axes (X and Y) within a range of ±90 degrees. Its resolution is 0.01 degrees, and its absolute accuracy at 25°C is 0.016 degrees.
What is the sensor's power supply and power consumption?
The sensor operates on a DC power supply in the range of 9 to 36 volts, with a current draw between 10 and 20 mA.
What type of connector does the sensor use?
This sensor is equipped with a 7-pin Golden Russian connector, which provides a strong, stable connection in harsh industrial environments.
What temperature range is defined for the sensor's operation and storage?
The sensor's operating temperature range is -30°C to +80°C, and in storage it can withstand temperatures between -40°C and +100°C.
Is this sensor used in civil engineering and structural stability projects?
Yes, thanks to its high accuracy and stability under environmental conditions, this sensor is an excellent choice for monitoring bridges, structures, road construction equipment, cranes, and heavy machinery.
What are the physical dimensions and weight of this inclinometer?
The aluminum housing of this sensor measures 82 × 70 × 35 mm and weighs 300 grams.
Key Features & Benefits of the ATS-20290A
High accuracy, industrial-grade design, and easy connectivity to control systems make this tilt sensor an excellent choice for industrial and civil engineering applications.
Guaranteed Accuracy & Calibration
With high accuracy and factory calibration, the ATS-20290A sensor delivers stable tilt angle measurements across a wide range of operating conditions.
Standard Industrial Communication
Support for RS485, RS422, RS232, and the Modbus-RTU protocol for easy connection to PLCs and industrial monitoring systems.
Rugged Industrial Design
Rugged aluminum housing with an IP67 protection rating for reliable performance in industrial and outdoor environments.
Easy Integration
Ideal for remote monitoring projects, smart equipment, and control systems based on the Internet of Things.
Direct Contact with Azaresys
For technical consultation, price inquiries, and IoT project reviews, get in touch with our experts.
Fast and direct communication with the Azaresys team
+989908221864
Phone
For consultation, price inquiries, and project matters
+982144459738
Send requests and project information
sales@azaresys.ir
Head Office
Tehran
Unit 5, Khayyam Complex, No. 2,
Ostandari Dead End, Besarati St.,
Kabiri Tameh Blvd. (North Shahin),
Jannat Abad, Tehran
Factory
Mianeh
Golestan 6th St., Industry Blvd.,
Industrial Estate No. 1, Mianeh
Specialized consultation for IoT projects
Design and delivery of solutions tailored to project needs
Support from design through implementation and operation
Send Us Your Message
Tell us about your company and your requirements. We'll get back to you within one business day.